Britax EMBLEM - Securing Your Child; Harness Height Adjustment Overview; Harness Buckle Position Overview

20
BRITAX Child Safety, Inc.
Securing Your Child
1. Follow the instructions
on page 22 to make the
proper adjustments to the
harness and buckle.
2. Loosen the harness.
a. Lift harness adjuster
lever.
b. Pull both harness
straps forward.
3. Open the chest clip.
a. Press tabs.
b. Pull apart.
4. Release the buckle and
attach the harness straps
to the harness holders.
5. Place the child in the child
seat.
NOTE: Ensure the child
is positioned upright in
the child seat and not
slouching. Their bottom
must touch the child seat,
and their back must rest
flat against the back of the
child seat.
6. Position the harness
straps around the child.
IMPORTANT: Adjust the
harness to fit the clothes
the child is wearing.
Remove bulky coats,
jackets and/or bulky
sports equipment before
putting the child in the
child seat.
3a
3b
2b
2a
IMPORTANT: Impact absorbing chest pads are highly
recommended for forward-facing mode. Removal of chest
pads is optional for rear-facing mode to ensure a snug fit
for small infants.