EasyManua.ls Logo

Britax EMBLEM - Using LUAS and Top Tether; LUAS System Anchor Locations

Britax EMBLEM
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
EMBLEM/ALLEGIANCE Canadian User Guide
Removing the Anti-Rebound Bar
1. Remove the car seat from
the vehicle and place it
on its back to access the
underside of the seat.
2. Push the two release
levers on either side of
the anti-rebound bar
and lift up on the bar to
remove it from the seat.
Using the Lower Universal Anchorage System (LUAS) and
Top Tether
The Lower Universal Anchorage System or LUAS is a
system available on this child seat that oers an alternative
to vehicle seat belt installation methods. The figure below
shows typical locations for lower anchors and tether
anchors in a vehicle. See pages 2-3 for LUAS components
on this child seat.
Check your vehicle owner’s manual to learn if it is equipped
with LUAS, the maximum weight rating for the lower
anchors, tether anchors capacities, and information on the
lower anchor locations and designated seating positions
available for use with this child seat.
LUAS SYSTEM ANCHOR LOCATIONS
Tether
Anchor
Lower
Anchors
Lower Anchors
27.9 cm (11 in.)

Table of Contents

Related product manuals