Britax Poplar - Securing Your Child; Harness and Buckle Adjustment

35
Securing your Child
1. Make the proper
adjustments to the
harness and buckle (see
pages 12-17).
2. Loosen the harness.
a. Lift harness release
button.
b. Pull both harness
straps forward.
3. Open the chest clip.
a. Press tabs.
b. Pull apart.
4. Release the buckle and
the harness straps.
Place the harness
straps to the side.
5. Place the child in the
child restraint.
NOTE: Ensure the child is
positioned upright in the
child restraint and not
slouching. Their bottom
must touch the child
restraint, and their back
must rest at against
the back of the child
restraint.
IMPORTANT: Remove bulky
coats, jackets and/or bulky
sports equipment before
putting the child in the child
restraint.
6. Position the harness
straps around the child.
a
b
3
1
5
4
6
2
a
b