Britax Poplar - Removing the Outer Rim Cover

42
Removing the Outer Rim Cover
1. Loosen the harness.
a. Lift harness release
button.
b. Pull both harness
straps forward.
2. Lower the head
restraint to its lowest
position.
3. Unsnap the two (2)
snaps on the back of
the child restraint.
4. Untuck the plastic tabs
under the forward-
facing belt path on
each side.
5. Pull the top of outer rim
cover forward from the
side panels.
1
a
b
2
4
5
5
5. Close ClickTight.
6. Route the belly pad
and buckle through
lower infant insert if
necessary (see page
17 for lower infant
insert weight limits).
3