Britax Poplar - Replacing the Seat Pan Cover

41
1
a
4
Replacing the Seat Pan Cover
1. Open the ClickTight.
a. Squeeze the
ClickTight release
buttons.
2. Slide the seat pan
cover onto seat pan.
3. Attach the two (2)
elastic straps under the
seat pan.
4. Route the buckle and
belly pad.
a. Turn the buckle
strap retainer
sideways and push
it down through
seat pan cover and
the seat pan.
NOTE: Ensure that the
buckle is through the
correct cover slot for
the desired buckle
position.
3
4. Detach the two (2)
elastic straps under the
seat pan.
5. Pull cover away from
the child restraint.
4
2
5