Britax Poplar - Cleaning

47
Cleaning
Shell Cover
Harness and
Harness Pads
ReboundReduce
TM
Stability Bar
Harness Buckle
• SPONGE CLEAN the shell
using warm water and
mild soap.
• TOWEL DRY.
• DO NOT use abrasive
cleaners.
• Refer to product
care label for wash
instructions.
• If care label indicates
machine washable,
always refer to britax.ca/
faqs for important care
information.
• DO NOT bleach or iron.
• SPONGE CLEAN the
stability bar using warm
water and mild soap.
• TOWEL DRY.
• DO NOT disassemble.
• DO NOT machine wash
or machine dry.
• DO NOT bleach or iron.
• THOROUGHLY RINSE the
buckle using warm
water.
• TEST THE BUCKLE
by fastening and
unfastening until a click
is heard after inserting
each buckle tongue.
If clicks are not heard,
repeat the cleaning
procedure.
• TOWEL DRY.
• DO NOT soak, lubricate,
use solvents, use
soap or household
detergents.
• SPONGE CLEAN the
harness or harness pads
using warm water and
mild soap.
• TOWEL DRY.
• DO NOT disassemble the
harness.
• DO NOT attempt to
permanently remove
the harness pads.
• DO NOT machine wash
or machine dry.
• DO NOT bleach or iron.