Britax Poplar - Replacing the Outer Rim Cover

44
Replacing the Outer Rim Cover
1. Lower the head
restraint to its lowest
position.
2. Slide the top part of the
outer rim cover onto
the side panels of the
child restraint.
3. Snap the two (2) snaps
on the back of the child
restraint.
4. Tuck the cover around
the forward-facing belt
path on each side.
5. Pull and tuck the
plastic tabs under the
forward-facing belt
path on each side.
1
2
4
5
12
12. Unthread the harness
adjuster strap from
cover.
13. Remove cover.
14. Close the ClickTight.
3