Britax Poplar - Page 45

43
6
6. Raise the head
restraint to its highest
position.
7. Open the ClickTight.
a. Lift the front cover
ap.
b. Squeeze the
ClickTight release
buttons.
8. Detach the two (2)
elastic straps on either
side of the harness
adjuster strap.
9. Untuck the lower part
of outer rim cover
around the belt paths
and strike plate on
each side.
10. Untuck the plastic tabs
on the outside under
the rear-facing belt
path on each side.
11. Detach the two (2)
elastic straps at the
bottom of the child
restraint.
8
10
9
Strike Strike
PlatePlate
7
a
b
11