Britax Poplar - Replacing the Head Restraint Cover

39
Replacing the Head Restraint Cover
2
7
3
8
7. Remove the two (2)
elastic straps from
the back of the head
restraint. Repeat on the
other side.
8. Route the harness
from the head restraint
cover slot.
9. Remove the head
restraint cover.
9
1
1. Place the head
restraint cover on the
head restraint.
2. Attach the two (2)
elastic straps on the
head restraint adjuster.
3. Route the harness
through the head
restraint cover slots.