Britax Poplar - Maintenance and Cleaning

38
Maintenance
Removing the Head Restraint Cover
IMPORTANT: Before each use, check this child restraint
and its components to make sure they are in good
condition and good working order.
1. Loosen the harness.
a. Lift harness release
button.
b. Pull both harness
straps forward.
2. Raise the head
restraint to its highest
position.
3. Open the chest clip.
a. Press tabs.
b. Pull apart.
4. Unbuckle the harness.
5. Remove the lower
infant insert if
necessary.
6. Remove the two (2)
elastic straps from the
head restraint adjuster.
1
a
b
6
a
b
3
2
2
4