Britax Poplar - Detailed Cleaning Instructions

45
6
6. Raise the head
restraint to its highest
position.
7. Open the ClickTight.
a. Lift the front cover
ap.
b. Squeeze the
ClickTight release
buttons.
8. Slide the plastic tab
between the rear-
facing belt path and
the metal plate on
each side.
9. Tuck the the lower
part of outer rim cover
around the belt paths
and strike plate on
each side.
10. Pull and tuck the
plastic tabs on the
outside under the rear-
facing belt path on
each side.
11. Thread the harness
adjuster strap.
11
10
9
Strike Strike
PlatePlate
8
Metal Metal
plateplate
7
a
b