Brivo ACS Installation Manual ACS5000-E
ENG-WI-001 © 2005 Brivo Systems, LLC. All rights reserved. Page 11
WARNING: Heat and Noise
DO NOT INSTALL THE CONTROL PANEL IN AN AREA THAT COULD DROP
BELOW 32 DEGRESS FAHRENHEIT OR EXCEED 120 DEGREES.
Doing so can
cause damage to components within the control panel.
DO NOT INSTALL THE CONTROL PANEL NEAR OR ON THE SAME CIRCUIT
WITH DEVICES THAT PRODUCE LARGE AMOUNTS OF ELECTRICAL NOISE.
This includes grinders, electric motors and blowers, electrical switch-gear and other
electrically noisy equipment. Electrical noise can interfere with panel operation. If it is
not possible to install the panel away from such sources of noise, it is advisable to
isolate it by using a high-quality UPS (Uninterruptible Power Supply) between the AC
Mains and the transformer.
To Next Page
Loading...