Need help?Do you have a question about the Brivo ACS5000-E and is the answer not in the manual?
General| Type | IP Access Controller |
|---|---|
| Model | ACS5000-E |
| Connectivity | Ethernet |
| User Capacity | 50, 000 |
| Operating Temperature | 0° to 49°C (32° to 120°F) |
| Operating Humidity | 5% to 95% non-condensing |
| Humidity | 5% to 95% non-condensing |
| Outputs | 8 |
| Outputs Form-C relay | 8 |
Details compliance with Federal Communications Commission (FCC) rules for digital devices.
Outlines terms of use, copyright, and intellectual property for the document.
States that product use is subject to the Brivo Systems Services Agreement.
Explains the purpose and target audience of the installation manual.
Describes the organization of the manual into procedural checklists.
Defines key terms used throughout the installation manual.
Lists other available guides and support contacts for installers.
Explains the system's IP-enabled nature and reader compatibility.
Covers network compatibility, administrator access, and system registration checks.
Lists the expected parts included in the control panel and expansion kits.
Guides on determining panel size and completing the installation worksheet.
Provides guidelines for selecting appropriate locations for chassis based on distance.
Crucial warning about consulting fire codes before installing locks on doors.
Caution against using fail-secure mode without local authority permission.
Advises on environmental conditions and electrical noise for panel installation.
Instructions for preparing and physically mounting the chassis.
Warning against using hammers to remove knockouts to prevent circuit damage.
Details how to connect the MAIN BOARD and expansion boards to the power supply.
Step-by-step guide for connecting battery wires to the power supply.
Caution against connecting the backup battery prematurely to avoid panel damage.
Instructions for connecting the AC transformer to the power supply board.
Warning about using appropriate outlets and timing for transformer connection.
Steps to power on the control panel and verify indicator lights.
Essential checks before powering up the control panel, like disconnecting the battery.
Instructions for connecting boards using the CAN BUS system.
Critical advice on maintaining twisted pairs for CAN BUS integrity.
Directive to not connect the AEN port to avoid interfering with the network.
Emphasizes not connecting the AEN port due to significant network interference risks.
Guide for connecting a laptop to the MAIN BOARD for diagnostics.
Steps for connecting the control panel to the Local Area Network.
Detailed instructions for wiring Request-to-Exit (REX) devices and door sensors.
Guidance on connecting the door latch control relay for access.
Instructions for connecting a door latch requiring up to 250mA current.
Steps for wiring the auxiliary relay for functions like alarm shunting.
How to connect auxiliary inputs for various monitoring purposes.
Guide for connecting auxiliary outputs to power external devices.
Comprehensive guide for connecting various reader types and their components.
Instructions for installing Metal Oxide Varistors for noise suppression.
Critical warning about installing the supplied MOV for noise suppression.
Details on wiring the 8 outputs and 8 inputs of the INPUT OUTPUT BOARD.
Instructions for properly grounding the control chassis for safety.
To Next Page