ENG-WI-001
Legal Disclaimers
Federal Communications Commission (FCC) Compliancy
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation or when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Increase the distance between the equipment and receiver.
• Connect the equipment to a circuit other than the one to which the receiver is connected.
• Consult the dealer for help.
Documentation Disclaimer and Restrictions
Information in this document is subject to change without notice and does not represent a commitment on
the part of Brivo Systems, LLC. For the most up-to-date information, visit
www.brivo.com and click
Dealers to gain access to the Extranet.
This document and the data herein shall not be duplicated, used or disclosed to others for procurement or
manufacturing, except as authorized with the written permission of Brivo Systems, LLC. The information
contained within this document or within the product itself is considered the exclusive property of Brivo
Systems, LLC. All information in this document or within the hardware and software product themselves is
protected by the copyright and/or other intellectual property laws of the United States.
Activation of Services Agreement
Any use of this product is subject to the activation of the Brivo Systems Services Agreement. Please
request a copy from Brivo Systems, LLC. and review this agreement carefully.
© 2005 Brivo Systems LLC. All rights reserved.
Brivo™ is a trademark of Brivo Systems, LLC. Brivo Systems, LLC, 4350 East West Highway, Suite. 201,
Bethesda, MD 20814
Comment [cet1]: Needs to be
updated later]
To Next Page
Loading...