32
© 2020 Brivo Systems LLC. All rights reserved. P-MAN-PUB-Panel Networking Guide
Panel Networking Guide
Upgrade Reader Firmware (ACS6000 and ACS300 only)
The Upgrade Reader Firmware page allows the administrator to upgrade the rmware for OSDP peripheral devices
attached to the control panel. To access this page:
NOTE: The rmware upgrade le will ONLY be sent by Brivo to the administrator. Do not use any other rmware
upgrades les provided from other sources.
1. Click Hardware to access the Hardware menu bar.
2. Click Upgrade Reader Firmware to access the Reader Module Information page.
3. To upgrade the rmware of a reader, click on Choose File and select the rmware upgrade le you wish to
use from your local storage device. Select the appropriate PD Address from the dropdown menu and then
click the Upgrade button to begin the rmware upgrade process.
Figure 32: Upgrade Reader Firmware
To Next Page
Loading...
