Brivo IPDC - Hardware Tab

27
© 2020 Brivo Systems LLC. All rights reserved. P-MAN-PUB-Panel Networking Guide
Panel Networking Guide
Hardware Tab
The Hardware tab of the Administrative Interface allows you to check the status of the control panel hardware, to
change the LED settings for waiting state, to limit the number of notications reported for certain events, to assign
OSDP addressing to OSDP readers, and to upgrade rmware for OSDP readers.
Status
The Hardware Status page provides a complete view of the state of all major components of the control panel
hardware. To access this page:
1. Click Hardware to access the Hardware menu bar.
2. Click Status to access the Brivo Hardware Status page. Status values are dened in the text on the right side
of the page.
Figure 27: Brivo Hardware Status