What to do if the Air Filter (B) issue occurs on my Broaster VF-2 Fryer?
If the Air Filter is not in place on your Broaster Fryer, insert the Air Filter all the way. If there is a failed switch, push the power OFF button and contact a service person.
How to fix a Broaster VF-2 when the POWER light is not illuminated?
If the POWER light is not illuminated on your Broaster Fryer, first, press the ON button and ensure the unit is turned ON. Also, make sure the unit is properly plugged in. If the fire extinguisher pressure is below the low limit, disconnect the main power and contact a certified fire suppression agent.
What to do if the cycle will not start on my Broaster VF-2 Fryer?
If the cycle on your Broaster Fryer will not start, first, press the ON button and ensure the unit is turned ON. If the solid-state controller is in program mode, exit program mode. If a Lockout Condition has tripped, consult the INDICATOR LIGHTS section. If the platform is not lowered, contact a service person.
What to do if the HEAT ON light is not illuminated on my Broaster Fryer?
If the HEAT ON light is not illuminated on your Broaster Fryer, first, press the ON button and ensure the unit is turned ON. If the solid-state controller is in program mode, exit program mode. If the oil temperature has reached the programmed temperature, the unit is ready to cook.
What to do if the cycle stops in progress on my Broaster Fryer?
If the cycle stops in progress on your Broaster Fryer, first, press the START button. If a Lockout Condition has tripped, consult the INDICATOR LIGHTS section.
What causes a High Limit Reset on my Broaster VF-2 Fryer?
If the High Limit Reset is triggered on your Broaster Fryer because the oil exceeded maximum temperature, push the power OFF. If there is a Probe Failure, contact a service person.
What to do if the Product Door (A) issue occurs on my Broaster VF-2?
If the Product Door is open on your Broaster Fryer, close the product door. If there is a failed switch, push the power OFF button and contact a service person.
What to do if the Access Door issue occurs on my Broaster Fryer?
If the Access Door is open on your Broaster Fryer, close the Access Door. If there is a failed switch, push the power OFF button and contact a service person.
What to do if the Element Up issue occurs on my Broaster VF-2 Fryer?
If the Element is in a raised position on your Broaster Fryer, lower the element. If there is a failed switch, push the power OFF button and contact a service person.
What to do if the Grease Filter issue occurs on my Broaster Fryer?
If the Grease Filter is not in place on your Broaster Fryer, insert the Grease Filter. If there is a failed switch, push the power OFF button and contact a service person.
General| Model | VF-2 |
|---|---|
| Category | Fryer |
| Fryer Type | Pressure Fryer |
| Power Source | Electric |
| Phase | 1 or 3 |
| Construction | Stainless Steel |
| Type | Commercial |
| Voltage | 240V |
To Next Page
