1-4
SECTION 1
DESCRIPTION AND SPECIFICATIONS
The IC-600-A is a self-propelled Industrial Crane designed for lifting and material handling, with
special features of self-loading cargo decks, 4-wheel steer, and 4-wheel drive. The basic unit
consists of a chassis and hydraulic boom assembly. The chassis includes a frame, four hydraulic
independently controlled outriggers, engine, 6-speed transmission, front steering-driving axle and
rear steering-driving axle, fuel tank, hydraulic oil tank, control station, three-mode full-power
steering, power brakes, all weather cab and lighting package. The boom assembly includes a
hydraulic powered continuous rotation turret, 4-section telescopic boom, hydraulic boom elevation
cylinder, hydraulic boom telescope cylinder, and hydraulic powered planetary gear hoist. Rated
Capacity Limiter (RCL) is standard.
IC-600-A:
4-section hydraulically extended boom with capacity of 60,000 pounds (27,216 kg) at an 8-foot
(2.4 m)
-load radius. Horizontal reach of 70 feet (21.34 m) and vertical reach of 81.1 feet
(24.71 m).
General:
Length:
Overall 32 feet 10 inches (10.01 m)
Chassis 17 feet 9 inches (5.41 m)
Width: 8 feet 6 inches (2.59 m)
Height:
Overall 11 feet 3 inches (3.43 m)
Deck 56
inches (1.42 m)
Wheelbase: 108 inches (2.74 m)
Ground Clearance:
Chassis 16.6 inches (42 cm)
Minimum (Tailpipe) 13.8 inches (35 cm)
Angle of Approach: 25 degrees
Angle of Departure: 23 degrees
Outriggers:
Spread 16 feet
5 inches (5.00 m)
Penetration 4.5 inches (114 mm)
Boom Movement:
Rotation Continuous
Elevation 0 to 75 degrees
Telescope 47 feet (14.33 m)
Boom Speeds:
Rotation 0.53 RPM
Elevation 18.7 seconds
Telescope 51.7 seconds
Hoist Line Speeds:
Low-Speed Mode: 121 ft./min. (36.88 m/min.)
To Next Page
Loading...
