2-15
Any time there is a control system fault detected, there will be a pop-up window identifying
what the fault is. The various diagnostics screens will help identify the issue that needs to be
resolved.
If there is an engine warning or engine stop signal,either the amber (warning) or red (stop)
icons on the main display will be lit until resolved; an audible alarm will also sound. A pop-up
window identifying what the engine fault(s) is will also appear on the screen alerting the
operator of the issue. There may be several to scroll through.
W A R N I N G
The crane will not operate if it is not level.
Level Guide Screen: Within the outrigger display screen there is a bubble level that
provides feedback to the operator on the current status of the crane's level. This screen will
assist
in leveling
the crane during setup. The number of degrees the crane is off of "true level"
appears on the side of each axis on the level display.
To Next Page
Loading...
