Broderson RT-400-A - Introduction

1-1
BRODERSON MANUFACTURING CORPORATION
RT-400-A ROUGH TERRAIN CRANE
INTRODUCTION
The Broderson RT-400-A was designed and built to provide safe, dependable, and efficient crane
service. That, we warrant, by our testing and quality control procedures. To properly utilize the full
potential of the equipment, the following customer controlled conditions must exist:
1. The operator must understand the equipment.
2. The operator must know the operating characteristics.
3. The operator must observe the safety rules.
4. The equipment must be given proper maintenance.
This manual was written to provide information required for these conditions. The
recommendations for periodic inspection, test, and maintenance are minimum standards for safe
and economical performance.
When ordering parts, the unit serial number, unit model number, part number, part description and
quantity must be provided.
This unit must not be altered or modified without written factory approval.
To reorder this manual, ask for RT-400-A Operation and Maintenance Manual, Part Number
99030225. Contact your Broderson Service Representative at:
Broderson Manufacturing Corp.
14741 W. 106
th
Street
Lenexa, Kansas, 66215 U.S.A.
913-888-0606
NOTICE
If this crane becomes involved in an accident, please call Broderson Manufacturing Corp. at 913-
888-0606, and ask for the Legal Department or the Service Manager. Also, please notify your
Broderson dealer.