Unwind the AC power cord completely.
Insert the plug into any convenient AC outlet.
Once the unit is connected to the main supply, the unit will enter standby
mode. To turn the unit off completely, you must remove the main plug from
the AC outlet.
Please disconnect the main plug from the AC outlet if the device is not going
to be used for a long period of time.
SUBWOOFER CONNECTION
An external subwoofer speaker can be connected to the socket marked “Subwoofer”
on the rear of the main unit.
Connect one end of RCA cable (not included) to the SUBWOOFER output
socket, and the other side to your subwoofer (not supplied).
Press the STANDBY/ON button to switch the unit on and enjoy the music.
AUX CONNECTION
Connect a 3.5mm stereo jack lead (not included) to the AUX-IN jack
and the other end to your preferred device.
Press the FUNCTION button on the unit or on the remote control
to select AUX mode, “AUX” will be shown on the display.
Select the play function on the auxiliary device and the sound output
can then be heard from the unit.
1.
2.
3.
1.
2.
1.
2.
3.
14
To Next Page
Loading...
