EasyManua.ls Logo

Brookstone IDESIGN - iPod Charging and AUX Input; iPod Charging and AUX Connection

Brookstone IDESIGN
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Press the VOL and VOL+ buttons to adjust to the desired sound level.
NOTE: If you want to watch photos and videos from the iPod, please
connect the VIDEO sockets on the rear of the unit as described in
the “Video Output Connection” section of the user guide.
CHARGING YOUR iPod
While your iPod is docked, it will automatically recharge until it is fully charged
in CD or AUX mode.
Other non-docking types of iPod models will NOT be charged.
Note: The unit will not charge the iPod in Radio mode.
OPERATING AUX IN CONNECTION (audio cable is not included)
You can listen to the sound of the connected external device through
your stereo system’s speakers.
Connect one end to a 3.5mm plug signal wire to the AUX IN SOCKET
and the other end to home equipment such as a portable CD player or VCR.
Press the STANDBY button to turn the unit “ON.
Press the FUNC button repeatedly to select AUX mode and the
display shows AUX.
The unit is now set up to play your home equipment.
Press the VOL and VOL+ buttons on the unit or press the VOLUME
button on the remote control to adjust the sound level.
6.
1.
2.
3.
4.
5.
31

Other manuals for Brookstone IDESIGN