Press PROG/CLK ADJ button again to save the selected track.
The programmed serial number “P02 00” appears on the display.
Repeat steps 2-3 to program up to 20 tracks.
Press the
button to play the programmed tracks when programming
is completed.
Clear Program (Resume Normal Playback)
Press STOP button twice in Programmed Playback mode, or release the CD
door, or change to another mode to clear the programmed tracks.
MP3 DISC OPERATION
Normal Playback
After loading a MP3 disc, the MP3 will be read automatically. “TOC READ” flashes
in the display. The total number of folders and tracks will be displayed briefly and the
playback of the disc will begin at the first track of the first folder. The “MP3”, folder
number, track number and playing time will be indicated on the display. The folder
number and the track number will take turns flashing on the display.
3.
4.
5.
26
To Next Page
Loading...
