EQ button
Press this button to select one of the 5 preset sound equalizer settings.
They are FLAT, ROCK, CLASSIC, POP and JAZZ.
CD PLAY MODE/ST-MO button
Press the CD MODE/ST-MO to select repeat function in CD mode.
Press the CD PLAY MODE/ST-MO button in Tuner mode to switch
in between stereo and mono reception.
CLOCK SETTING
When the unit is plugged into a wall outlet for the first time, the display will show
“00:00” or “AM 12:00”. The unit should be in Standby mode to set the current time.
In Standby mode, press the PROG button on the unit or the remote control.
The hour digits “24H or 12H” will flash on the display.
Press the
or buttons on the unit or the remote control to change
to 24-hour or 12-hour time format.
Press the PROG button again, the hour digit will flash. Press
or
buttons on the unit or on the remote control repeatedly to select
the current hour.
Press the PROG button again, the minute digit will flash.
Press or buttons to select the current minute.
Press PROG button again to complete the setting of the current time.
1.
2.
3.
4.
5.
18
To Next Page
Loading...
