29
Programmed Playback for MP3s
It is possible to program a selection of up to 20 files for playback. Individual tracks
can be programmed more than once.
After a CD containing MP3 tracks is loaded, press the PROGRAM button on
the unit or on the remote control. “P01F-00” and “F-00” appears on the display.
Press the
or buttons to select the desired folder and then press the
PROG. or PROGRAM button to confirm. “P01 000” appears in the display.
Press the
or buttons to select the desired track and then
press the PROG. or PROGRAM button to confirm. “P02 F-00” appears
in the display.
Repeat steps 2-3 until the memory is full.
When programming is complete, press the
button to begin playback
of the selected folders/files.
Clear Program (Resume Normal Playback)
Press the STOP button twice, release the CD, or change to another mode
to erase the programmed tracks.
iPod OPERATION
This unit is equipped with a docking system to allow you to connect and play
your iPod. The docking system is able to fit most types of iPod models currently
available. The unit is designed with a universal docking station that will accomodate
your iPod’s own insert.
1.
2.
3.
4.
5.
To Next Page
Loading...
