Brookstone IDESIGN - Programmed Playback

25
Play Modes
1. Repeat the Current Track
Select the track to be repeated and begin playback.
Press the CD MODE button on the remote once.
“Repeat” will flash on the display and the selected track will be
repeated continuously.
2. Repeat All Tracks
During playback, press the CD MODE button twice.
“ Repeat” will be shown on the display and all tracks on the disc will be
repeated continuously.
3. Random Playback
The Random playback feature allows you to play all the tracks on the current disc in
a random order. This function can be selected when the disc is playing or stopped.
Press the CD MODE button three times to enter Random Playback mode.
“RANDOM” will flash on the display.
Press the CD MODE button four times to cancel Random Playback mode
and normal playback will resume.
Programmed Playback
The CD player can be programmed to play any sequence of up to 20 tracks
in CD mode. Load compact disc into the CD compartment.
Press PROG/CLK ADJ button on the remote once while CD player
is stopped/not playing. “PROGRAM” will flash on the display.
Press
or buttons to select the desired track to be programmed.
For example, track 3.
•
•
•
•
•
•
•
1.
2.