NORMAL PLAYBACK
After loading the disc, press FUNC button to select CD Mode until “TOC READ”
flashes on the display. The disc will begin spinning and the total number of the tracks
on the disc and total playback time will be shown on the display. The unit will play the
CD starting with the first track.
Note: If there is no disc in the unit, “NO DISC” will appear on the display.
Pause
To pause temporarily during CD playback, press the button. The disc will pause
and the elapsed track time will flash on the display. Press the
button again to
resume playback.
Stop
To stop CD playback, press the button on the unit or on the remote control.
The CD will stop playback and the whole tracks and time of the disc will be shown
on the display. Press the
button to return to the beginning of the first track.
Skip Track
During playback, press the or buttons to skip to the next or previous tracks.
High-Speed Music Search
During playback, press and hold the or buttons to skip/search through
a track at high speed. When you release the
or button, normal speed
playback will resume at that point.
24
To Next Page
Loading...
