EasyManua.ls Logo

Brookstone IDESIGN - Page 21

Brookstone IDESIGN
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The unit will automatically turn on at the selected time. Please ensure the
correct time is set before setting the Timer On function.
The Timer On function can only be operated if the unit is switched to Standby
mode when it is not in use.
If you wish to be woken up by radio, ensure that a radio station is tuned.
If the CD or iPod isn’t connected when the unit turns on, the unit will switch
to radio automatically.
SLEEP SETTING (AUTOMATIC TURN OFF)
The sleep time enables the system to switch off by itself after a set period of time.
When the unit is turned on, press the TIMER/SLEEP button repeatedly
until the desired sleep time is shown on the display.
The SLEEP time can be set at 120, 90, 60, 30, 15, 0 minutes.
To deactivate the Sleep function, set the time to 0.
To cancel Sleep function, press either POWER button or SLEEP button
once or more until the sleep indicator disappears from the display.
Note: You can set desired sleep time when the unit is in AUX mode.
If the playing time is shorter than the selected sleep time while CD
or iPod is playing, the music will stop at the end of the disc.
1.
2.
3.
4.
20

Other manuals for Brookstone IDESIGN