Why is the fabric wrinkled when using my Brother CS-80 Sewing Machine?
D
David CarpenterSep 14, 2025
Fabric wrinkling with your Brother Sewing Machine can happen if:
* The upper thread was not threaded correctly, or the bobbin is incorrectly installed: Correctly thread the upper thread and correctly install the bobbin thread.
* The spool is incorrectly installed: Correctly install the spool.
* The combination of fabric, thread, and needle is not correct: Select a thread and needle that are appropriate for the type of fabric being sewn.
* The needle is bent or blunt: Replace the needle.
* If thin fabrics are being sewn, the stitch is too coarse: Shorten the stitch length or sew with stabilizer material under the fabric.
* The thread tension is incorrect: Adjust the tension of the upper thread.