8
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
OPERATION BUTTONS
Using the operation buttons
D. OPERATION BUTTONS
1 Sewing speed controller
Slide this lever to change the sewing speed.
2 “NEEDLE POSITION” button
Press this button to move the needle either up
or down.
3 “REVERSE STITCH” button
Hold down this button to sew either backwards
or in the same place at a slow speed. When
sewing a reverse stitch, sewing is done in re-
verse. When sewing a reinforcement stitch, three
stitches are sewn at the same position.
4 “START/STOP” button*
This lighted button changes to green when the
machine is ready to start or while it is sewing. If
the machine cannot be started, this button
changes to red. In addition, this button lights up
in orange while the bobbin thread is winding onto
the bobbin (the bobbin winder shaft is moved to
the right).
* Sewing continues at a slow speed while this
button is pressed.
1
4
3
2
5
3
To Next Page
Loading...
Need help?
General
