EasyManua.ls Logo

Brother CS-8072 - Appliqués; Sewing Sharp Curves

Brother CS-8072
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
APPLIQUÉS
1. Use a temoprary spray adhesive, fabric glue or a basting stitch
to attach the appliqué to the fabric. This will keep the fabric
from moving during sewing.
1 Appliqué
2 Fabric glue
2. Attach presser foot “J”. Check that the needle drops slightly
off the edge of the appliqué, then begin sewing.
1 Appliqué material
2 Needle drop position
Sewing sharp curves
Stop the machine with the needle in the fabric outside the appliqué.
Raise the presser foot and turn the fabric a little bit at a time while
sewing, for an attractive finish to the seam.
* Placing a lightweight tear away stabilizer beneath stitching area
will improve the stitch placement along the edge of the appliqué
fabric.
6
6
3
16
J
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)

Table of Contents

Related product manuals