38
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
OVERCASTING (WHEN USING THE OPTIONAL SIDE CUTTER)
1
7
8
5
2
5
1
6
5
6
1: Normal sewing
7: Overcasting stitch for light and medium
weight fabrics
8: Overcasting stitch for heavyweight fabrics
1. Push the “NEEDLE POSITION” button to raise
the needle, then turn off the power.
2. Raise the presser foot lever.
3. Press the black button at the back of the presser
foot holder, and remove the presser foot.
4. Use the included disc-shaped screwdriver to
loosen the screw of the presser foot holder, and
remove the presser foot holder.
5. Set the fork of the operating lever around the
needle clamp screw.
1 Needle clamp screw
2 Operating lever
* Make sure that the fork of the operating lever is
set onto the screw firmly.
6. With the presser foot raised, align the presser
foot holder screw hole directly with the notch in
the side cutter, then insert the screw and lightly
tighten it. Lower the presser foot lever and firmly
tighten the screw.
To Next Page
Loading...
Need help?
General
