40
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
R
1
1
1
3
3
BLIND HEM STITCHING
9: For woven fabrics
10:For stretch fabrics (jersey, knit fabrics)
1. Place the fabric wrong side up. Fold and baste
the fabric as illustrated.
1 5 mm (3/16'')
2 Basting stitches
3 Wrong side of the fabric
9
10
4. Remove the basting stitches and turn over the
fabric.
1 Wrong side of fabric
2 Right side of fabric
Blind hem stitches can not be sewn if the left nee-
dle drop point does not catch the fold. If the needle
catches too much of the fold, the fabric can not be
unfolded and the seam appearing on the right side
of the fabric will be very large, leaving an unattrac-
tive finish. If you experience either of these cases,
take the following steps to solve the problem.
3. Sew the fabric, keeping the folded edge in con-
tact with the presser foot.
1 Needle position
2. Attach blind hem stitch foot “R”, and lower the
presser foot. Position the fabric so the folded
edge touches the guide of the presser foot.
1 Guide
2 Fold
R
To Next Page
Loading...
Need help?
General
