18
CONTENTS BEFORE USE
SEWING
UTILITY STITCHES MAINTENANCE
SEWING CHART
PATTERNS
(PROGRAMMED IN
MACHINE)
SELECTING A STITCH PATTERN
This sewing machine is equipped with 40 built-in
utility and decorative stitches.
Press the stitch selection key that shows the stitch
you want to sew. The LED lamp will light up.
If the stitch you want to sew is shown on the right
side of the stitch selection key, touch the stitch pat-
tern switch key. The LED lamp will light up.
* When the LED lamp on the stitch pattern switch
key is lit, the stitch pattern on the right side is
selected. When the LED lamp on the stitch pat-
tern switch key is turned off, the stitch pattern
on the left side is selected.
* You must press the stitch pattern switch key to
change it. It will not change automatically when
another key is pressed (except when the main
power switch is turned OFF). Always check the
stitch pattern switch key's LED lamp when you
make a stitch selection.
1 A lit LED lamp shows the selection.
2 Stitch pattern switch key
3 If the lamp is lit the right side is selected; if
the lamp is turned off the left side is selected.
Note
- Before changing the stitch, press the “NEEDLE
POSITION” button to raise the needle.
- When the main power switch is turned ON, the
stitch pattern switch key's LED lamp will turn
off, and the straight stitch (left) is automatically
selected.
1 2 3 4 5 6 87
21 22 23 24 2525 26 27 28
1
2
3
To Next Page
Loading...
Need help?
General
