Brother DC200 - Optional Accessories; Product Specifications

67
4
The following are available as optional accessories
to be purchased separately.
* Contact the retailer who sold you this machine or
the nearest authorized service center.
* Use a mat designed specifically for this machine
which has a “DesignNCut” logo. The machine will
not operate correctly if any other mat is used.
* This product is only compatible with line
embossing.
* For the complete list and newest information on
optional accessories, refer to the Brother Solutions
Center (http://s.brother/cpqaa/).
OPTIONAL ACCESSORIES
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11. 12.
13. 14. 15.
16. 17. 18.
No. Part Name Part Code
1
Low tack adhesive mat 12" × 12"
(305 mm × 305 mm)
CAMATLOW12
2
Standard mat 12" × 12"
(305 mm × 305 mm)
CAMATSTD12
3
Standard cut blade holder
(turquoise) (with no blade)
CAHLP1
4 Standard cut blade CABLDP1
5
Low tack adhesive mat 12" × 24"
(305 mm × 610 mm)
CAMATLOW24
6
Standard mat 12" × 24"
(305 mm × 610 mm)
CAMATSTD24
7
Deep cut blade holder (purple)
(with no blade)
CAHLF1
8 Deep cut blade CABLDF1
9 Pen holder CAPENHL1
10 Color pen set CAPEN1
11 Erasable pen set CAPEN2
12
Iron-on fabric appliqué contact
sheet (white backing)
CASTBL1
13
High tack adhesive fabric
support sheet
CASTBL2
14 Spatula and Hook Set CASPHK1
15 Embossing Tool Set CAEBSTLS1
16 Embossing Mat CAEBSMAT1
17 Embossing Silver Metal Sheets CAEBSSMS1
18 Embossing Brass Metal Sheets CAEBSBMS1
PRODUCT SPECIFICATIONS
Items Specifications
Dimensions
Approx. 497 mm (W) × 178 mm (D) ×
146 mm (H)
(Approx. 19.5 inches (W) × 7.0 inches
(D) × 5.7 inches (H))
Weight Approx. 3.3 kg (Approx. 7.3 lb)
Power Supply AC100V 50/60Hz (AC adapter)
Maximum power
consumption
30 W (When cutting)
No. Part Name Part Code