Brother DCP 8060 - Switching Users

Security features
21
4
Turning Secure Function Lock on/off 4
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Secure Function Lock on 4
a Press Menu, 1, 7.
17.Function Lock
a Lock OffiOn
Set Password
b Setup User
Select ab & OK
b Press a or b to select Lock OffiOn.
Press OK.
c Enter your four-digit administrator
password. Press OK.
Turning Secure Function Lock off 4
a Press Menu, 1, 7.
17.Function Lock
a Lock OniOff
b Change User
Select ab & OK
b Press a or b to select Lock OniOff.
Press OK.
c Enter your four-digit administrator
password. Press OK.
Switching Users 4
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting in one minute.
a Hold down d as you press Secure.
Function Lock
Change User
a John
b Mary
Select
ab & OK
b Press a or b to select
the registered name of the user
to be logged on.
Press OK.
c Enter your four-digit password.
Press OK.