Brother DCP 8060 - Changing Copy Quality; Changing Text Copy Resolution

Making copies
25
5
Changing copy quality 5
You can select from a range of quality
settings. The default setting is Auto.
 Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.
 Text
Suitable for documents containing only
text.
 Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the instruction below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c (DCP-8060)
Press Quality.
(DCP-8065DN)
Press Contrast/Quality.
Then press a or b to choose Quality.
Press OK.
d Press d or c to choose Auto, Text or
Photo.
Press OK.
e Press Start.
To change the default setting, follow the
instructions below:
a Press Menu, 2, 1.
21.Quality
a Auto
Text
b Photo
Select
ab & OK
b Press a or b to choose the copy
quality. Press OK.
c Press Stop/Exit.
Changing text copy
resolution 5
You can change the text copy resolution to
1200x600dpi if you have selected Text
from the Quality or Contrast/Quality
options, and make a copy with 100% ratio
using the scanner glass. To change the text
copy resolution, follow the instructions below:
a Put your document on the scanner
glass.
b Press Menu, 2, 2.
22.FB Txt Quality
a 1200x600dpi
b 600dpi
Select
ab & OK
c Press a or b to choose the text copy
resolution. Press OK.
d Press Stop/Exit.