Chapter 5
26
Enlarging or reducing the
image copied 5
You can select the following enlargement or
reduction ratios:
Custom(25–400%) allows you to enter a
ratio from 25% to 400%.
Auto sets the machine to calculate the
reduction ratio that best fits the size of paper.
To enlarge or reduce the next copy follow the
instructions below:
a Load your document.
b Use the dial pad to enter the number of
copies (up to 99).
c Press Enlarge/Reduce.
d Press Enlarge/Reduce or c.
e Choose one of the options below:
Press a or b to select the
enlargement or reduction ratio you
want. Press OK.
Press a or b to select Custom
(25–400%). Press OK. Use the dial
pad to enter an enlargement or
reduction ratio from 25% to 400%.
(For example, press 5 3 to enter
53%.) Press OK.
f Press Start.
Note
• The Auto setting is available only when
loading from the ADF.
• Page Layout Options 2 in 1(P), 2 in 1(L),
4 in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
(P) means Portrait and (L) means
Landscape.
Press
Enlarge/Reduce
100%*
104% EXEiLTR
141% A5iA4
200%
Auto
Custom(25–400%)
50%
70% A4iA5
78% LGLiLTR
83% LGLiA4
85% LTRiEXE
91% Full Page
94% A4iLTR
97% LTRiA4
To Next Page
Loading...
