Brother DCP 8060 - Checking Remaining Life of Parts

80
Checking remaining life of
parts C
You can view the remaining life of
maintenance parts on the LCD.
a (DCP–8060) Press Menu, 4, 3.
(DCP–8065DN) Press Menu, 5, 3.
53.Parts Life
1.Drum
2.Fuser
3.Laser
Select ab & OK
b Press a or b to select 1.Drum,
2.Fuser, 3.Laser, 4.PF Kit MP,
5.PF Kit 1 or 6.PF Kit 2.
Press OK.
53.Parts Life
1.Drum
Remaining:100%
Note
The life check of a part will be accurate
only if you have reset that part’s life
counter when you installed a new part. It
will not be accurate if you have reset that
part’s life counter during the life of a used
part.