ControlCenter2
187
10
E-mail 10
The Scan To E-mail feature lets you scan a document to your default E-mail application, so you can send
the scanned job as an attachment. To change the default E-mail application or attachment file type, click the
button while holding down the Ctrl key and choose Software Button.
To change the E-mail application, choose your preferred E-mail application from the E-mail Application
pop-up menu. You can add an application to the lists by clicking the Add button
1
. To delete an application,
click the Delete button.
1
When you first start ControlCenter2 a default list of compatible E-mail applications will appear in the pop-up menu. If you are having trouble using
a custom application with ControlCenter2 you should choose an application from the list.
If you want to scan and then crop a portion of a page after pre-scanning the document, check the
Show Scanner Interface box.
If you want to scan a duplex document, check Duplex(two-sided) Scanning and choose
Long-edge binding or Short-edge binding. (Not available for the DCP-8080DN and MFC-8480DN)
To Next Page
Loading...
