Firewall settings (For Network users)
86
4
3In External Port number for this service: Enter “54925”.
4In Internal Port number for this service: Enter “54925”.
5Make sure UDP is selected.
Then, click OK.
e If you still have trouble with your network connection, click Add.
f Add port 137 for network scanning by entering the information below:
1In Description of service: Enter any description, for example “Brother Network Print”.
2In Name or IP address (for example 192.168.0.12) of the computer hosting this service on
your network: Enter “Localhost”.
3In External Port number for this service: Enter “137”.
4In Internal Port number for this service: Enter “137”.
5Make sure UDP is selected.
Then, click OK.
g Make sure that the new setting is added and is checked, and then click OK.
Windows Vista
®
users 4
a Click the button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
To Next Page
Loading...
