Brother DCP-J774DW

• Press to look up and dial numbers that are stored in the machine's memory.
Press to configure the wireless settings while the machine is idle.
a or b
Press to scroll through the menus and options.
d or c
• Press to move the cursor left or right on the LCD.
• Press to either confirm or cancel a procedure which is in progress.
4. Telephone buttons
Tel/R
If the machine is in Fax/Tel (F/T) mode and you pick up the handset of an external telephone during the
F/T ring (pseudo/double-ring), press Tel/R to talk.
When connected to a PBX, press to gain access to an outside line or to transfer a call to another
extension.
Redial/Pause
• Press to redial the last number you called.
• Press to select and redial the numbers from the Outgoing Call history or Caller ID history.
• Press to insert a pause when dialling numbers.
5. Dial Pad
• Use to dial fax and telephone numbers.
• Use as a keyboard to enter text or characters.
6.
Stop/Exit
• Press to stop an operation.
• Press to exit from a menu.
7. Start buttons
Mono Start
• Press to start sending faxes in monochrome.
• Press to start making copies in monochrome.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
Colour Start
• Press to start sending faxes in full colour.
• Press to start making copies in full colour.
• Press to start scanning documents (in colour or monochrome, depending on the scan setting).
8.
Power On/Off
Press to turn the machine on.
Press and hold down to turn the machine off. The LCD displays [Shutting Down] and stays on for a
few seconds before turning itself off. If you have connected an external telephone or TAD, it is always
available.
If you turn the machine off using
, it will still clean the print head periodically to maintain print quality. To
prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected
to a power source at all times.
8