Brother DCP-J774DW

Home > Fax > Receive a Fax > Receive Mode Settings > Set the F/T Ring Time (Pseudo/Double-ring)
Set the F/T Ring Time (Pseudo/Double-ring)
Related Models: MFC-J491DW/MFC-J497DW/MFC-J890DW/MFC-J895DW
When you set the Receive Mode to [Fax/Tel], if the call is a fax, your machine will receive it automatically.
However, if it is a voice call, the machine will sound the F/T ring (pseudo/double-ring) for the time you set in the
F/T Ring Time option. When you hear the F/T ring, it means that a voice caller is on the line.
Because the F/T ring is a setting only on your Brother machine, extension and external telephones will not ring;
however, you can still answer the machine's call on any telephone.
>> MFC-J491DW/MFC-J497DW
>> MFC-J890DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [F/T Ring Time]. Press OK.
d. Select how long the machine will double-ring to alert you to a voice call. Press OK.
3. Press Stop/Exit.
Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set
time.
MFC-J890DW/MFC-J895DW
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [F/T Ring Time].
2. Press how long the machine will double-ring to alert you to a voice call.
3. Press
.
Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set
time.
Related Information
• Receive Mode Settings
• Receive Modes Overview
• Operation from External and Extension Telephones
216