Brother DCP-J774DW

Level 1 Level 2 Level 3 Descriptions
WLAN WPS w/ PIN Code
- Configure your wireless network settings using
WPS with a PIN.
WLAN Status Status
View the current wireless network status.
Signal
View the current wireless network signal
strength.
SSID
View the current SSID.
Comm. Mode
View the current Communication mode.
MAC Address
- View the machine's MAC address.
Wi-Fi Direct Push Button
- Configure your Wi-Fi Direct network settings
using the one-button push method.
PIN Code
- Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Manual
- Configure your Wi-Fi Direct network settings
manually.
Group Owner
- Set your machine as the Group Owner.
Device
Information
Device Name
View your machine's device name.
SSID
View the Group Owner's SSID.
When the machine is not connected, the LCD
displays Not Connected.
IP Address
View your machine's current IP Address.
Status
Information
Status
View the current Wi-Fi Direct network status.
Signal
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
I/F Enable
- Turn the Wi-Fi Direct connection on or off.
Web Connect
Settings
Proxy Settings Proxy Connection
Change the Web connection settings.
Address
Port
User Name
Password
WLAN Enable
- - Turn wireless network connection On or Off.
Network Reset
- - Restore all network settings back to the factory
settings.
Settings > [Print Reports]
Level 1
Descriptions
XMIT Verify
(MFC-J491DW/MFC-J497DW)
Print a Transmission Verification Report for your last transmission.
Address Book
(MFC-J491DW/MFC-J497DW)
Print a list of names and numbers stored in the Address Book.
Fax Journal
(MFC-J491DW/MFC-J497DW)
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings
Print a list of your settings.
Network Config
Print a list of your Network settings.
WLAN Report
Print the wireless LAN connection results.
571