Level 1 Descriptions
Caller ID History
(MFC-J491DW/MFC-J497DW)
Print a list of the available Caller ID information about the last 20 received faxes and
telephone calls.
Settings > [Machine Info.]
Level 1 Descriptions
Serial No.
Check your machine's serial number.
Firmware Version
Check your machine's firmware version.
Firmware Update
Update your machine to the latest firmware.
Firmware Auto Check
View firmware information on the Home screen.
Settings > [Initial Setup]
Level 1
Level 2 Descriptions
Date & Time Date
(MFC-J491DW/MFC-J497DW) Add the date and time on the
screen and in the headings of the faxes you send.
(DCP-J572DW) Set the date and time on your machine.
Time
Auto Daylight
(MFC-J491DW/
MFC-J497DW)
Set the machine to change automatically for Daylight Saving
Time.
Station ID
(MFC-J491DW/
MFC-J497DW)
- Enter your name and fax number so it appears on each page
you fax.
Tone/Pulse
(MFC-J491DW/
MFC-J497DW)
(Available only for some
countries.)
- Select the dialling mode.
Fax Auto Redial
(MFC-J491DW/
MFC-J497DW)
- Set the machine to redial the last fax number if the fax did not
go through because the line was busy.
Dial Tone
(MFC-J491DW/
MFC-J497DW)
- Shorten the dial tone detect pause.
Phone Line Set
(MFC-J491DW/
MFC-J497DW)
- Select the telephone line type.
Compatibility
(MFC-J491DW/
MFC-J497DW)
- Adjust the equalisation for transmission difficulties.
VoIP service providers offer fax support using various
standards. If you regularly experience fax transmission errors,
select Basic (for VoIP).
Reset Machine Reset
Restore all the machine's settings that you have changed,
such as Date and Time and Ring Delay.
Network
Restore all network settings back to the factory settings.
Address Book &
Fax
(MFC-J491DW/
MFC-J497DW)
Erase all stored phone numbers and fax settings.
All Settings
Restore all the machine's settings back to the factory settings.
Local Language
- Change your LCD language.
572
To Next Page
Loading...
