EasyManuals Logo

Brother DCP-L2512D User Manual

Brother DCP-L2512D
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
2-65
Confidential
Error code A000
Image processing was not completed correctly because the number of pixels required for
image processing is insufficient in the scanned second side data.
Error code A200
The document scanning position sensor detected that the document length was 90 cm or
more during the one-side scanning.
<User Check>
Use the paper less than A4 size.
Remove the jammed document.
Error code A300
The document scanning position sensor has not detected the document passing even after
the document has been fed for the specified time.
<User Check>
Adjust the document guide to suit the document size.
Remove the jammed document.
Step Cause Remedy
1
Incorrect correction data for
second side CIS unit
Execute “Set CIS scan area (Function
code 55)”.
2 Second side CIS unit failure Replace the second side CIS unit.
3 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Document scanning position
actuator caught in some sections
of the machine
Reattach the document scanning position
actuator.
2
Document scanning position
sensor failure
Replace the ADF unit.
3 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Foreign object inside the ADF Remove the foreign objects inside the
ADF.
2
Document scanning position
actuator caught in some sections
of the machine
Reattach the document scanning position
actuator.
3
Connection failure of the
document scanning position
sensor harness
Reconnect the document scanning
position sensor harness.
4
Document scanning position
sensor failure
Replace the ADF unit.
5 Main PCB failure Replace the main PCB ASSY.

Table of Contents

Other manuals for Brother DCP-L2512D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L2512D and is the answer not in the manual?

Brother DCP-L2512D Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, Copy, Scan
Duplex PrintingAutomatic
Scanner TypeFlatbed
Copy ResolutionUp to 600 x 600 dpi
InterfaceUSB 2.0
Processor600 MHz
Memory64 MB
Print SpeedUp to 30 ppm
Print Resolution2400 x 600 dpi
Paper Input250 sheets
Paper Output100 sheets
Scan Resolution1200 x 1200 dpi
Copy SpeedUp to 30 cpm

Related product manuals