Brother DCP-L2512D User Manual

2-66
Confidential
 Error code A400
The ADF cover sensor detected that the ADF cover was open.
<User Check>
• Close the ADF cover correctly.
 Error code A500
When scanning the fax, white or black correction data for the first side CIS unit was not within
the correct range (first time).
Error code A600
When scanning the fax, white or black correction data for the first side CIS unit was not within
the correct range (second time).
Step Cause Remedy
1
ADF cover actuator caught in
some sections of the machine
Reattach the ADF cover actuator.
2
ADF cove sensor attachment
failure
Reattach the ADF cover sensor.
3 ADF cover attachment failure Reattach the ADF cover.
4
Connection failure of the ADF
cover sensor harness
Reconnect the ADF cover sensor
harness.
5 Damaged ADF cover Replace the ADF cover.
6 ADF cover sensor failure Replace the ADF unit.
7 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Incorrect correction data for first
side CIS unit
Execute “Acquire white level data
(Function code 55)”.
2
Dirt on the white tape on the
second side document hold
Clean the white tape on the second side
document hold.
3 Damaged first side CIS flat cable Replace the first side CIS flat cable.
4 First side CIS unit failure Replace the first side CIS unit.
5 White tape failure Replace the document scanner unit.
6 Main PCB failure Replace the main PCB ASSY.

Brother DCP-L2512D Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan
Duplex Printing	Automatic
Scanner Type	Flatbed
Copy Resolution	Up to 600 x 600 dpi
Interface	USB 2.0
Processor	600 MHz
Memory	64 MB
Print Speed	Up to 30 ppm
Print Resolution	2400 x 600 dpi
Paper Input	250 sheets
Paper Output	100 sheets
Scan Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm