Brother DCP-L5500D User Manual

Home > Fax > Receive a Fax > Remote Fax Retrieval > Use Your Remote Access Code
Use Your Remote Access Code
Related Models: MFC-L5700DN/MFC-L5755DW/MFC-L5900DW/MFC-L6700DW/MFC-L6900DW
1. Dial your fax number from a telephone or another fax machine using touch tone.
2. When your machine answers, immediately enter your Remote Access Code (three digits followed by *).
3. The machine signals if it has received messages:
• One long beep -- Fax messages
• No beeps -- No messages
4. When the machine gives two short beeps, enter a command.
• The machine will hang up if you wait longer than 30 seconds to enter a command.
• The machine will beep three times if you enter an invalid command.
5. Press 9 0 to reset the machine when you are finished.
6. Hang up.
• If your machine is set to Manual mode and you want to use the remote retrieval features, wait for about
100 seconds after it starts ringing, and then enter the remote access code within 30 seconds.
• This function may not be available in some countries or supported by your local telephone company.
Related Information
• Remote Fax Retrieval
251

Brother DCP-L5500D Specifications

General

Printer Type	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Paper Capacity	250 sheets
Scan Resolution	1200 x 1200 dpi
Operating System Compatibility	Windows, macOS, Linux
Processor	600 MHz
Memory	256 MB
Display	2-line LCD
Monthly Duty Cycle	50000 pages
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet
Dimensions (W x D x H)	16.1 x 12.5 in
Automatic Document Feeder (ADF)	Yes