Home > Routine Maintenance > Pack and Ship Your Machine > Pack the Machine and the Toner Cartridge
Together
Pack the Machine and the Toner Cartridge Together
WARNING
• This product is heavy and weighs more than 16.8 kg. To prevent possible injuries, at least two people
should lift the product by holding it at the front and back.
• If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the
machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you
or damage to the machine.
• Pack the Optional Tray(s) separately in its original carton with original packing material.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
1. Press and hold to turn the machine off. Leave the machine off for at least 10 minutes to cool down.
2. Disconnect all the cables, and then unplug the power cord from the electrical socket.
The machine is equipped with a non-detachable AC power cord depending on the model.
3. Put the machine into the bag it originally came in.
4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the
original packing material as shown.
580
To Next Page
Loading...
Need help?
General
