Brother DCP-L5500D User Manual

Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN
(For wireless
network models)
Set to Default
- - Restore the wireless network
settings to the factory settings.
WLAN Enable
- - Turns the wireless interface on or
off.
Wi-Fi Direct
(For wireless
network models)
Push Button
- - Configure your Wi-Fi Direct network
settings using the one-button push
method.
PIN Code
- - Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Manual
- - Configure your Wi-Fi Direct network
settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Device
Information
Device Name
- View your machine's device name.
SSID
- View the Group Owner's SSID.
When the machine is not connected,
the LCD displays Not Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
I/F Enable
- - Turn the Wi-Fi Direct connection on
or off.
NFC
(Available only for
certain models)
- - - Turn the NFC function on or off.
E-mail Mail Address
- - Enter the email address.
Setup Server SMTP Server
Enter the SMTP server name and
address.
Port
Enter the port number.
Auth. for
SMTP
Select the Security method for email
notification.
SSL/TLS
Send or receive an email via an
email server that requires secure
SSL/TLS communication.
Verify
Cert.
Verify the SMTP Server Certificate
automatically.
Setup Mail TX Sender Subject
- View the subject.
Size Limit Size Limit
Limit the size of email documents.
Maximum
Size(MB)
Notification
- Send notification messages.
Web Connect
Settings
Proxy Settings Proxy
Connection
- Change the Web connection
settings.
Address
-
625

Brother DCP-L5500D Specifications

General

Brand	Brother
Model	DCP-L5500D
Category	All in One Printer
Language	English